Corrigendum to "Comparing Structure-Property Evolution for PM-HIP and Forged Alloy 625 Irradiated with Neutrons to 1dpa" [Mater. Sci. Eng. A (2022) 144058]

Authors

Caleb Clement, Purdue University
Sowmya Panuganti, Purdue University
Patrick H. Warren, Purdue University
Yangyang Zhao, Purdue University
Yu Lu, Boise State UniversityFollow
Katelyn Wheeler, Idaho National Laboratory
David Frazer, Idaho National Laboratory
Donna P. Guillen, Idaho National Laboratory
David W. Gandy, Electric Power Research Institute
Janelle P. Wharry, Purdue University

Document Type

Corrigendum

Publication Date

3-2024

Abstract

The authors regret that after publication, they discovered that the dislocation loop number density was undercounted by a factor of 100 for both the PM-HIP and forged specimens. While this does not change the original major conclusions, this necessitates a change in the results presentation (Sections 3.2 and 4.1) and calculated hardening (Table 3, Fig. 5). Corrections to these affected sections are provided in this corrigendum.

Comments

See http://scholarworks.boisestate.edu/mse_facpubs/526 for article.

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-No Derivative Works 4.0 International License.

Publication Information

Clement, Caleb; Panuganti, Sowmya; Warren, Patrick H.; Zhao, Yangyang; Lu, Yu; Wheeler, Katelyn; Frazer, David; Guillen, Donna P.; Gandy, David W.; and Wharry, Janelle P.. (2024). "Corrigendum to "Comparing Structure-Property Evolution for PM-HIP and Forged Alloy 625 Irradiated with Neutrons to 1dpa" [Mater. Sci. Eng. A (2022) 144058]". Materials Science and Engineering: A, 894, 146202. https://doi.org/10.1016/j.msea.2024.146202