Schedule

Subscribe to RSS Feed

2009
Monday, April 20th
1:00 PM

20 MW Solar Power Plant

1:00 PM - 4:00 PM

A Study of the Effects of Mechanical Alloying NiAl

1:00 PM - 4:00 PM

Assessing Streamflows in the Big Wood River Watershed

1:00 PM - 4:00 PM

Calibration and Field Sample Collection Using an Ion Mobility Spectrometer for Detection and Analysis of Subsurface Volatile Organic Compounds

1:00 PM - 4:00 PM

Co-Nitriding Uranium and Dysprosium Metals by Reactive Milling

1:00 PM - 4:00 PM

Collapsible Storage Tank

1:00 PM - 4:00 PM

Crystallographic Characterization of Rare-Earth Hafnates

1:00 PM - 4:00 PM

Design of a Tracking Collar Enclosure for Use in the Wild by the USDA

1:00 PM - 4:00 PM

Design of Experiments to Maximize Production Throughput of ZnO Varistors

1:00 PM - 4:00 PM

Design of Franklin Boulevard Interchange

1:00 PM - 4:00 PM

Development of a Continuous Flow Polymerase Chain Reaction Device in Low Temperature Co-Fired Ceramics

1:00 PM - 4:00 PM

Development of a Smart Crossed- Field Amplifier

1:00 PM - 4:00 PM

Eagle Interchange Improvements

1:00 PM - 4:00 PM

Embedded Strobe Board Tester for Electronics Controls Company

1:00 PM - 4:00 PM

Energy Balance Modeling in the Snake River Basin

1:00 PM - 4:00 PM

Evaluation of a Weldable Zipper System for AIRE/Outcast Boats Inc.

1:00 PM - 4:00 PM

Experimental Evidence for Polaron Hopping Conduction in HfO2 – A Cryogenic Study

1:00 PM - 4:00 PM

Exploration of Dynamic Recrystallization in Metals Using the Finite Element Modeling Program OOF2

1:00 PM - 4:00 PM

Human Powered Vehicle Competition

1:00 PM - 4:00 PM

Idaho State Highway 21 Five Mile Creek Fish Passage Project

1:00 PM - 4:00 PM

Initial Investigations of Sub-RF AC Methods for Metal-Oxide- Semiconductor Devices and Trap-Based Flash Nonvolatile Memory

1:00 PM - 4:00 PM

Initial Results on the Fabrication of a Dielectrophoretic Trap for DNA Origami

1:00 PM - 4:00 PM

Investigation of Accelerated Corrosion in a Fresh Water Irrigation System

1:00 PM - 4:00 PM

Investigation of Residual Stress Induced Cracking in Thick TiOx Coatings

1:00 PM - 4:00 PM

Lissajous Patterns

1:00 PM - 4:00 PM

Log Cutting Apparatus Design Analysis

1:00 PM - 4:00 PM

Long Term Water Quality in a Commercial Office Building

1:00 PM - 4:00 PM

Lorentz Force Microscopy of Magnetic Domains in Ni-Mn-Ga

1:00 PM - 4:00 PM

Magnetic Characterization of Ni-Mn-Ga in the Martensite and Austenite Phase

1:00 PM - 4:00 PM

Magnetic-Field Liquid-Phase Sintering

1:00 PM - 3:00 PM

Meridian Interchange

1:00 PM - 4:00 PM

Multi-Vector Zip Line

1:00 PM - 4:00 PM

Northside Boulevard Interchange Improvements, Nampa, Idaho

1:00 PM - 4:00 PM

PAID: PMON Alarm Indication Device

1:00 PM - 4:00 PM

Prairie Sun Subdivision

1:00 PM - 4:00 PM

Prescribed Burn Apparatus

1:00 PM - 4:00 PM

Robotics: Robotic Arm

1:00 PM - 4:00 PM

Solar Thermal Test Stand Apparatus

1:00 PM - 4:00 PM

SPR Based Integrated Chemical Sensor

1:00 PM - 4:00 PM

Statistical Scanner Model Validation

1:00 PM - 4:00 PM

Stereolithography Apparatus (SLA) Prototype Part Tolerance Improvement

1:00 PM - 4:00 PM

Stream Computing Research and Practical Cartesian Meshing for Complex Urban Environments

1:00 PM - 4:00 PM

Surface Acoustic Wave Device Fabrication Using Zinc Oxide and Chalcogenide Thin Films

1:00 PM - 4:00 PM

Surface Plasmon Enhanced Optical Transmission through Periodically Modified Metallic Membrane

1:00 PM - 4:00 PM

The Development of a Power System Protection Lab at Boise State University

1:00 PM - 4:00 PM

The Distribution of Secondary- Phase Precipitates During Creep of Alloy 617

1:00 PM - 4:00 PM

The Use of Magnetic Shape Memory Alloys in Power Generation Devices

1:00 PM - 3:00 PM

Time Dependence of the Synthesis of Dysprosium Nitride Using a Reactive Milling Technique

1:00 PM - 4:00 PM

Torsional Harmonic Imaging: Expanding the Biological Nano-Mechanical Characterization Techniques at Boise State University

1:00 PM - 4:00 PM

Towards Integrated Visualization and Computation of Fluid Flows on Modern Graphics Hardware

1:00 PM - 4:00 PM

Transmission Electron Microscopy (TEM) Study of Twinning in Ni2MnGa

1:00 PM - 4:00 PM

USDA Wireless Tracking Device

1:00 PM - 4:00 PM

Utilizing a Fluidized Bed and Co-Fire Technique to Apply Glass Passivation Coating to Thermistors

1:00 PM - 4:00 PM

Variable Gain Amplifiers Using Chalcogenide-Based Variable Resistors

1:00 PM - 4:00 PM

Wind Farm Protection Scheme Design

1:00 PM - 4:00 PM

Wind Farm SCADA Integration

1:00 PM - 4:00 PM

Wind Turbine Replacement Blades

1:00 PM - 4:00 PM